LDO sc Process sensor for dissolved Oxygen

LDO sc Process sensor for dissolved Oxygen
Product #: LXV416.99.20031
Unit Price Contact Us

Extremely reliable - 36-month warranty on probe

The optimised temperature sensor and the new 3D factory calibration make O2 measurement even more accurate

No electrolyte or membrane changes necessary

Remote functions for simple and convenient data transfer via Internet and SMS

Constantly provides information on the current sensor status via PROGNOSYS early warning system

Specifications

Accuracy: ± 0.1 ppm below 5 ppm
  ± 0.2 ppm above 5 ppm
  Temperature: ± 0.2 °C
Cable length: 30 m
Diameter: 48.25 mm
Dimensions (D x L): 48.25 mm x 254 mm
Flow rate: None required
Interferences: No Interferences from the following: H2S, pH, K+, Na+, Mg2+, Ca2+, NH4++, Al3+, Pb2+, Cd2+, Zn2+, Cr (total), Fe2+, Fe3+, Mn2+, Cu2+, Ni2+, Co2+, CN-, NO3-, SO42-, S2-, PO43-, Cl-, anion active surfactants, crude oils, Cl2 < 4 ppm
Length: 254 mm
Measuring range: 0 - 20.00 mg/L
  0 - 20.00 ppm
  0 - 200 % Saturation
Operating temperature range: 0 - 50 °C
Pressure range: max. 3.5 bar
Relative humidity: 95 %
Repeatability: ± 0.1 mg/L (ppm)
Response time: T90 < 40 s
  T95 < 60 s
Sensitivity: ± 5 % of span
Sensor cable: 30 m (99 ft.) terminated with quick-disconnect plug
Sensor Thread: 1" NPT outer thread
Storage conditions: -20 °C - 70 °C
Transmission distance: 1000 m (3280 ft.) maximum when used with a termination box
  100 m (328 ft.) maximum when used with an extension cable
Warranty: 36 months
Weight: 1.0 kg
Wetted materials: Probe body: CPVC, Polyurethane, FKM/FPM, Noryl, 316 Stainless Steel 1.4404 (AISI 316L)
Sensor cap: Acrylic