5500 sc Ammonia Monchloramine Analyser, 1 Channel

5500 sc Ammonia Monchloramine Analyser, 1 Channel
Product #: 5500.AMC.1.KTO
Unit Price Contact Us

Easy operation

The analyser offers an easy-to-operate, low-maintenance solution to help you maintain the proper chlorine to ammonia ratio and assure there is no free ammonia in your system that could lead to nitrification. We removed the traditional pumps associated with reagent delivery and replaced them with a pressurized system to eliminate the hassles and maintenance that pumps can cause.

Reliability without all the work

With Prognosys, the analyser’s onboard predictive diagnostic software, you will have early insight into the measurement reliability and service requirements of your instruments. A user-friendly interface, colour coded reagent bottles and at-a-glance status lights will offer peace of mind the instrument is up and running.

Improved control of your chloramination process

The 5500 sc Ammonia Monochloramine Analyser provides continuous monitoring, so you can trust that your instrument is giving you the information you need to control your chloramination process.

What's included

Hach 5500sc Ammonia Monchloramine Analyser, 1 channel, with installation kit and user manuals, reagents and standards for one month use

Specifications

Accuracy: ± 5 % or 0.01 ppm (as N) for sample temperature 5 - 40 °C (41 - 104 °F); ±10% or 0.02 ppm for sample temperature 40 - 50 °C (104 - 122 °F), whichever is greater
Alarm: Four; not powered SPDT relays, each rated at 5A resistive, 240 VAC maximum
Certifications: CE (EN 61326-1: 2006; EN 61010-1: 2010; EN 60529: 1991, +A1:2000
cETLus (UL 61010-1:2012; NEMA 250:2003; CSA C22.2 No 61010-1:2012)
Australian RCM Marking
Communication: Modbus RS485, Profibus DP (available with external controller), 4-20mA Output
Cycle Time: 4.5 min minutes
Detection limit: 0.01 ppm (as N)
Enclosure waterproof rating: IP56 / NEMA 4X
External Filter: No
Flow rate: 100 - 1000 mL/min
Grab sample: Grab Sample In and Grab Sample Out capability
Inlet: 6mm OD push-to-connect fitting for plastic tubing
Light source: Class 1M LED (light emitting diode) with a peak wavelength of 650 nm
Material: Polycarbonate (PC)/ABS case, PC Door, PC hinges and latches, 316 Stainless Steel hardware
Measuring interval: 4.5 minutes
Measuring range: 0.01 - 2 ppm (as N), 0.1 - 10.0 mg/L (as Cl₂)
Mounting: Wall, panel, or table
Number of channels: 1
Number of sample streams: 1 or 2 in programmable sequence
Operating humidity: 5 - 95 % non-condensing
Operating temperature range: 5 - 45 °C (41 - 113 °F)
Options: Standard
Outlet: 11mm (7/16 in.) ID slip-on fitting
Outputs: Four 0/4-20 mA Outputs, load impedance 600 ohm maximum
Parameter: Total Ammonia, Monochloramine, and Free Ammonia
Pollution degree: 2/II
Power requirements (Hz): 50 - 60 Hz
Power requirements (Voltage): 100 - 240 V AC
Reagent consumption: 1L of reagents every month with 5 minute cycle time
Repeatability: 3 % or 0.01 ppm (as N), whichever is greater
Response time: Within 5 minutes
Sample pressure: 2.5 - 87 psi (0.17 - 6.8 bar)
Sample temperature: 5 - 50 °C (41 - 122 °F)
Storage conditions: -20 - 60 °C (-4 to 140 °F)
Warranty: 24 months
Weight: 20.5 kg (45.19 lb) without reagents and standards, 30 kg (66.14 lb) with reagents, standards and cleaning solution
What's included?: Hach 5500sc Ammonia Monchloramine Analyser, 1 channel, with installation kit and user manuals, reagents and standards for one month use