A1100 O₂ sensor, ATEX, hastelloy, FKM/FPM O-rings, cap w/o grille; ATEX certified only when used with an ATEX 36xxEx instrument

OBSOLETE ITEM

A1100 O₂ sensor, ATEX, hastelloy, FKM/FPM O-rings, cap w/o grille; ATEX certified only when used with an ATEX 36xxEx instrument
Product #: A110E-HVS

OBSOLETE ITEM

What's included

Sensor only.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.

Specifications

Accuracy: ±1% of reading, or ± lower measurement range, whichever is greater
Ambient temperature: -5 - 100 °C (23 - 212 °F) (due to electrolyte, but sensor will not be damaged up to 200°C / 392°F) (mechanical)
Body Material: Hastelloy
Certifications: 2004/108/EC - EN 61326-1
Flow rate: Recommended flow rate in flow chamber
2935A-A : 25 mL/min
2952A-A : 50 mL/min
2956A-A : 180 mL/min
29552A-A : 50 mL/min
Material: O-Rings: FKM/FPM
Measuring range: Range at 25 °C
2935A-A: 10 ppb - 400 ppm or 20 Pa - 1,000 kPa
2952A-A: 1 ppb - 80 ppm or 5 Pa - 200 kPa
2956A-A: 0.1 ppb - 20 ppm or 0.25 Pa - 50 kPa
29552A-A: 2 ppb - 80 ppm or 5 Pa - 200 kPa
Protection class: IP68
Response time: 2935A-A: 2.5 min
2952A-A: 38 s
2956A-A: 7.2 s
29552A-A: 90 s
Sample pressure: 0 - 100 bar
Temperature range: -5 - 60 °C (23 - 140 °F), without grille, during measurement or
-5 - 95 °C (23 - 203 °F), with grille
Warranty: 24 months
Weight: 0.3 kg
Wetted materials: Stainless Steel 1.4404 (AISI 316L), surface finish: N5, Ra < 0.4 µm
Membrane (see specification table).
No O-rings are in contact with the sample.
What's included?: Sensor only.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.