LDO 2 sc Process Sensor for Dissolved Oxygen, 10 m cable, extended warranty

LDO 2 sc Process Sensor for Dissolved Oxygen, 10 m cable, extended warranty
Product #: LXV416.99.20W01
Unit Price Contact Us
Available

Extremely reliable - 5 years long term warranty on probe

The optimised temperature sensor and the new 3D factory calibration make O2 measurement even more accurate

No electrolyte or membrane changes necessary

Remote functions for simple and convenient data transfer via Internet and SMS

Constantly provides information on the current sensor status via PROGNOSYS early warning system

What's included

Includes: calibration bags, sensor with 10 m cable, and manual

Specifications

Accuracy: ± 0.05 ppm Below 5 ppm
  ± 0.1 ppm Above 5 ppm
  Temperature: ± 0.2 °C
Cable length: 10 m
Calibration method: All probes are factory calibrated and ready to use
Air calibration: one point, 100% water saturated air
Sample calibration: comparison to standard instrument
Communication: Modbus via SC controller
Diameter: 48.25 mm (1.95 x 10.05 in.)
Dimensions (D x L): 48.25 mm x 254 mm
Flow rate: None required
Hazardous location ratings: ETL listed (cETLus marked) to Canadian and US General Safety and Hazardous (Class l, Div. 2) Locations
Housing material: Stainless
Immersion depth: 15 m, 1050 kPa, maximum
Interferences: No Interferences from the following: H2S, pH, K+, Na+, Mg2+, Ca2+, NH4+, Al3+, Pb2+, Cd2+, Zn2+, Cr (total), Fe2+, Fe3+, Mn2+, Cu2+, Ni2+, Co2+, CN-, NO3-, SO42-, S2-, PO43-, Cl-, anion active surfactants, crude oils, Cl2 < 4 ppm
Length: 254 mm
Measuring range: 0.01 - 20.00 mg/L
  0 - 200% saturation
Operating temperature range: 0 - 50 °C
Options: None
pH Range: 0 - 12 pH
Pressure range: Max. 3.5 bar
Protection class: IP68
Relative humidity: 95 % (non-condensing)
Repeatability: ± 0.1 mg/L (ppm)
Resolution: 0.01 mg/L DO
Response time: T90 < 40 s
  T95 < 60 s
Sensitivity: ± 5 % of span
Sensor cable: 10 m (33 ft.) terminated with quick-disconnect plug
Sensor Thread: 1" NPT outer thread
Storage conditions: -20 °C - 70 °C
Transmission distance: 1000 m maximum when used with a termination box
  100 m maximum when used with an extension cable
Warranty: Extended
Weight: 1.0 kg, probe only
Wetted materials: Probe body: CPVC, Polyurethane, FKM/FPM, Noryl, 316 Stainless Steel 1.4404 (AISI 316L)
Sensor cap: Acrylic
What's included?: Includes: calibration bags, sensor with 10 m cable, and manual