SS7 sc Turbidimeter for high sample temperature

OBSOLETE ITEM

SS7 sc Turbidimeter for high sample temperature
Product #: LPV432.99.00002

OBSOLETE ITEM

Virtually maintenance-free, optics never touch the sample

The Hach Surface Scatter 7 sc Turbidimeter (SS7) is uniquely designed so that the light source and photocell never come in contact with the sample. In fluids with high loads of suspended solids this makes sample cell cleaning and replacement unnecessary.

Wide turbidity measurement range from 0 to 9,999 NTU

All wetted parts of the Hach SS7 turbidimeter are made with corrosion-resistant materials for extended life. The photo-detector and light source assemblies are protected from the effects of corrosive vapors and heated samples. The SS7 turbidimeter is warranted against defects in materials or workmanship for two years from the date of shipment.

Durable-manufactured with corrosion/heat-resistant materials for extended life

The SS7 turbidimeter can reliably measure turbidity from 0 to 9999 NTU in samples that vary from clear water to corrosive and high temperature paper mill and oil field samples.

Separate sample and control units

Easy and accurate calibration in less than 10 minutes

Specifications

Accuracy: ± 10% of reading from 2000 - 9999 NTU
  ±5% of reading or ±0.1 NTU (whichever is greater) from 0 - 2000 NTU
Alarm: Relays can be programmed through sc controller for warning, alarm, feeder, event, pulse width modulation, and frequency control.
Ambient temperature: 0 - 50 °C
Channels: Instrument Only
Controller: No
Enclosure Construction: Plastic instrument enclosure
Enclosure waterproof rating: NEMA 12
Flow rate: Sample flow required 1.0 - 2.0 L/min (15 - 30 gal/hr)
Installation category: Category II
Measuring range: 0 - 9999
Measuring range (2): Nephelometric Turbidity Units (NTU)
Mounting: Wall mount
Number of channels: None
Power requirements (Voltage): None
Relative humidity: 5 - 95 % non-condensing
Repeatability: 1.0 % or ±0.04 NTU, whichever is greater
Resolution: 0.1 NTU between 1000 - 9999.9 NTU
Response time: Initial response in 45 seconds
Sample input: 0.75 " NPT female thread
Sample output: 1 " NPT female thread
Sample temperature: 0 - 70 °C
  0 - 70°C (32 - 158°F), intermittent to 80°C (176°F)
Warranty: 24 months
Weight: 18 kg